藤野代理 ACE GIKEN 技研點膠機閥SB-110ⅢS 日本軍工品質
2019-04-24 12:56:41
藤野貿易（廣州）有限公司-主營FA自動化、膠粘材料、油脂材料、機械設備、精密儀器、物流搬運，工具等產品
http://m.166281.cc/
.?液體定量吐出閥閥門SB-110ⅢS
藤野貿易（廣州）有限公司代理
高粘度液劑的高精度，能高速涂抹的擴展器。
液體定量吐出閥閥門SB-110ⅢS
高精度螺旋閥 高粘度液劑可以高效地快速地吐出。 The high viscosity liquid can be efficiently dispensed at high speed. 因為用螺旋軸的旋轉控制高精度吐出可能，纖細的點和線涂布能進行。 Thanks to the rotation control of the screw shaft, you can get a high precision dispensing to a delicate point and lines. 吐出效率大幅度提高。（與傳統產品相比最大提高2.5倍的效率） The dispensing efficiency rises greatly.(Max 2.5 time dispensing efficiency has improved compared with old gods. ) 空氣，液體積，發熱量也大幅度削減。 The place where air and the liquid collect has been decreased greatly, and the calorific value has been reduced,too. 接液部和驅動部的連接采用袋螺母方式。維護性大幅度提高，更加容易使用了。 This model has adopted cap-nut method, so you can maintain easy. 設置了專用的更換式螺絲刀，改善了排放不均、耐久性和消耗零件的低成本化，并在高維度兩立。 Because the screw liner of the exchange type was adopted, the improvement of the stability, the improvement of durability, and lowering the cost in wear-out parts warts warts warts warts warthe stability, the stability, the istability, the imhe imhe impreiere able to be done 是螺旋式擴展器的新基準模型。 This is a new benchmark model at a screw type dispenser.
最適使用液
Suitable liquid material
?????(Epoxy)、????(Silicone)、????(Grease)他
適応粘度
Applicable viscosities
30,000～500,000mPa?s
液加圧方式
Fluid pressurizing method
同期加圧(Synchronous) or 常時加圧(Always)
材料圧送圧
Material feed pressure
MAX0.5MPa
駆動方式
Dispensing screw driving method
????????????（????制御）(Stepping motor Servo control)
????回転數
Motor rotation speed
6～1,500rpm
????電源
Motor power
DC24～48V
????分解能
Motor resolution
0.72°/PULSE (500P/R)
外形寸法
Externals dimensions
W71.5×D42×H205
重量
Weight
約770g
吐出量
Dispensing volume
0.0001ml～連続
用途
Use
電子基板に????半田及び銀?????材精密塗布 電子部品に高粘度接著剤微細塗布など
備考
Remarks
????は、別売と成ります。
藤野代理日系產品,價格實惠,品質有保證.
藤野貿易（廣州）有限公司-主營FA自動化、膠粘材料、油脂材料、機械設備、精密儀器、物流搬運，工具等產品
http://m.166281.cc/